18
Remote Operation
To delete all messages after playback, hold down
DELETE
for
about 3 seconds. The system sounds a tone.
ˆ
Remote Operation
While you are away from your home or office, you can use a
touch-tone phone or a pulse (rotary) phone with a pocket tone
dialer to enter your remote operation security code and do any
of the following:
• Set the system to answer calls.
• Listen to your messages.
• Record a new outgoing message.
• Delete individual messages.
SECURITY CODE
To use your system from a remote telephone, you must first en-
ter a 3-digit remote operation security code. The security code
label is located on the bottom of the system. Enter the security
code after the system answers and sounds two tones. Within 7
seconds, enter one of the remote commands.
OPERATING THE SYSTEM FROM A
REMOTE LOCATION
Dial your phone number. Even if the system is off, it will turn on
and answer after about 10 rings. After the system sounds a
To Next Page
Loading...