41
You can quickly erase both sides of a cas-
sette tape using a bulk tape eraser (Cat.
No. 44-232).
Note: If you use metal or high-bias type
tape, the recorded sound might not be
erased properly.
Preventing Accidental Erasure
Cassette tapes have two erase-protection
tabs — one for each side. When a tab is in
place, you can record on that side.
To prevent accidental erasure of a tape re-
cording, use a screwdriver to remove one
or both of the cassette tape’s erase-protec-
tion tabs. This prevents
REC
from being
pressed.
To Next Page
Loading...
