42
If you later decide to record on a tape side
after you have removed the erase-protec-
tion tab, place a piece of strong plastic
tape over that side’s erase-protection hole.
Be sure you cover only the hole originally
covered by the erase-protection tab.
Caution: Removing the erase-protection
tabs does not prevent a bulk eraser from
erasing a cassette tape.
Cleaning the Tape-Handling
Parts
Dirt, dust, or particles of the tape’s coating
can accumulate on the tape heads and
other parts that the tape touches. This can
greatly reduce the recorder’s performance.
To Next Page
Loading...
