Need help? Call
1-800-950-7044!
5
HOW THE SYSTEM WORKS
When you press a key on the system’s remote control,
it sends a powerful RF signal to the RF command con-
sole, which then sends a corresponding IR signal to IR
remote controlled-devices in the same room as the
command console.
A LOOK AT THE SYSTEM’S
REMOTE CONTROL
Your system’s remote control was designed to include
the functions used most often to operate TV, VCR, ca-
ble converter, CD player, satellite receiver, and audio
equipment. Most of the keys operate the same as those
on your original remote control.
For example, a key on your original remote control la-
beled PWR ON/OFF is equivalent to
PWR
on the sys-
tem’s remote control.
15-1919.fm Page 5 Monday, July 19, 1999 12:34 PM
To Next Page
Loading...
