EasyManua.ls Logo

Radio Shack Wireless Remote Control System - User Manual

Radio Shack Wireless Remote Control System
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cat. No. 61-2576
OWNER’S MANUAL
Please read before using this equipment.
Wireless Remote Control System
61-2576.fm Page 1 Wednesday, September 8, 1999 1:50 PM

Questions and Answers

  • M
    Mary GomezJul 30, 2025
    What to do if Radio Shack Wireless Remote Control System Universal Remote cannot control Plug ’N Power modules?
    • S
      Sheila DelgadoJul 31, 2025
      If your Radio Shack Universal Remote cannot control other Plug 'N Power modules, there are several things to check. First, ensure that you have power to the AC outlet and the light or appliance is on. Try plugging another Plug ’N Power controller and the modules into the same AC outlet. If your controller is the only one you have, use an extension cord to plug the control center receiver and your other Plug ’N Power module into the same AC outlet. If the module still does not work, replace the module.
  • J
    Jason JohnsonAug 9, 2025
    Why does my Radio Shack Universal Remote not turn the control center receiver on or off?
    • E
      Elizabeth CraigAug 9, 2025
      If your Radio Shack Universal Remote isn't turning the control center receiver on or off, several factors could be the cause. First, ensure the red light on the remote illuminates when you press a button. If not, the batteries in the remote might be weak, so replace them. Also, verify that the house code dials on both the remote and the control center module are set correctly and that the 1-8/9-16 setting on the remote is correct. Finally, confirm that the AC outlet has power and that the light or appliance connected to it is turned on.
  • V
    Virginia GallegosAug 18, 2025
    What to do if Radio Shack Universal Remote control center module does not turn on or off using another type of Plug ’N Power controller?
    • M
      Molly KeyAug 19, 2025
      If the Radio Shack Universal Remote control center module isn't turning on or off using another type of Plug 'N Power controller, try plugging the control center receiver and the other Plug 'N Power controller into the same AC outlet. If it doesn't work in any AC outlet, even when connected to the same duplex (top and bottom) of the AC outlet, replace the control center receiver. If it works in some AC outlets but not in others, contact your local RadioShack store for help.

Summary

Wireless Remote Control System Features

Product Features Overview

Highlights the convenience, comfort, and security benefits of the wireless remote control system.

Safety and Precautions

Plug N Power Usage Precautions

Warns about potential unexpected consequences and the need for careful planning when using the system.

General Safety and Operational Guidelines

Emphasizes following all warnings, safety instructions, and not exceeding module ratings.

Safe Operation and Device Compatibility

Advice on using extreme care with dangerous products and compatibility with various light types.

System Setup and Operation

System Operation Principles

Explains how the system sends signals through household wiring to control modules.

Configuring House Codes

Setting a master code for system-wide control and interference prevention.

Configuring Unit Codes

Setting individual codes for up to 16 modules or groups of modules.

Optimizing Control Center Placement

Guidance on selecting the best location for the control center module for optimal signal reception.

Remote Control Preparation and Battery Installation

Instructions and cautions for installing AAA batteries in the remote control.

Initial System Setup and Configuration

Steps for setting house codes and unit selectors on the remote and control center.

Modules and Control Methods

Types of Plug N Power Modules

Descriptions of various modules: Appliance, Universal Appliance, Lamp Dimmer, and Wall Switch.

Wall Outlet Modules and Module Code Setting

Information on Wall Outlet Modules and the process of setting module house codes.

Connecting Devices to Modules

Steps for connecting devices and labeling the remote for module control.

Controlling Multiple Modules

Instructions for using the remote's slide switch to control groups of modules (1-8 or 9-16).

Adjusting Light Brightness

How to dim or brighten lights using specific remote control buttons.

Manual Module Control Options

Methods for manually controlling modules using their power switches and limitations.

Expanding Control System Capabilities

Adding more remote controls or other controllers like timers to the system.

Additional Controller Types Overview

Overview of Mini Remote Control Center and Keychain Remote Switch.

Advanced Controller Options: Security and Timers

Details on Wireless Home Security System and Programmable Control Center & Timer.

Troubleshooting, Maintenance, and Compliance

Troubleshooting System Issues

Guides users through common problems and their solutions for system operation.

System Care and Maintenance

Recommendations for keeping the system in good working order and ensuring longevity.

Intercom System Interference Considerations

Addresses potential interference issues between intercom systems and the remote control system.

Power Interruption Behavior

Explains how different module types behave after a power outage.

FCC Compliance Information

Details on FCC regulations, limits, and measures to reduce interference.

Product Warranty Details

Outlines the terms and conditions of the limited ninety-day warranty.

Radio Shack Wireless Remote Control System Specifications

General IconGeneral
BrandRadio Shack
ModelWireless Remote Control System
CategoryUniversal Remote
LanguageEnglish

Related product manuals