10
Preparation
2. If necessary, disarm the sensor alarm (the red
indicator should not be flashing) by entering the
current security code.
3. Press
PROG
. The sensor alarm beeps once and
the green PROG indicator lights.
4. Press
CODE
. The sensor alarm beeps twice and
the PROG
indicator flashes slowly.
5. Enter the current four-digit security code. The
sensor alarm beeps three times and the PROG
indicator flashes quickly.
6. Enter your new four-digit security code. The
PROG indicator lights steadily and the sensor
alarm chirps to show that it stored the new secu-
rity code.
7. Press
PROG
. The PROG indicator turns off.
Note:
If you don’t press a button for about 30 sec-
onds, the sensor alarm beeps, the PROG indicator
turns off automatically, and (if you have not complet-
ed Step 5) the security code remains unchanged.
Try arming and disarming your sensor alarm from the
main unit to be sure the security code works (see
49-329.fm Page 10 Thursday, June 1, 2000 7:46 AM
To Next Page
Loading...