3
Features
ˆ
Features
Your RadioShack Passive Infrared Sensor Alarm is a
high-quality, battery-operated security device. It uses
a passive infrared (PIR) motion sensor to detect in-
truders and activate a built-in alarm.
The sensor alarm’s features include:
Wireless RF (Radio Frequency) Operation
— pro-
vides maximum reliability with no wiring required.
Built-In PIR Sensor
— detects motion up to 30 feet
(9.1 m) away and from an angle of up to 110 degrees.
Built-In Alarm Siren
— activates when the sensor
detects an intruder, then automatically shuts down
and resets after about 2 minutes.
User-Programmable Security Code
— lets you set
your own disarm code.
Entry/Exit Delay
— gives you 30 seconds to disarm
the sensor alarm after you enter the protected area,
and gives you 10 seconds to leave the protected area
after you arm the alarm.
49-329.fm Page 3 Thursday, June 1, 2000 7:46 AM
To Next Page
Loading...