To Next PageTo Next Page
Need help?Do you have a question about the Radio Shack Chronosette-276 and is the answer not in the manual?
General| Type | Clock Radio |
|---|---|
| Model | Chronosette-276 |
| Manufacturer | Radio Shack |
| Tuning | Analog |
| Display | LED |
| Clock Display | Digital |
| Alarm Type | Buzzer |
| Radio Bands | AM/FM |
| Power Source | AC |
Illuminated dial for easy tuning in low light conditions.
Bright digital display for clear time readability.
Allows setting two distinct alarm times.
Shuts off radio/tape automatically after a set time (up to 59 mins).
Temporarily silences alarm for approximately 7 minutes.
Maintains clock/alarm for up to 8 hours during power outages.
Indicates when the backup battery needs replacement.
Initiates recording with a single button press.
Stops tape automatically at the end to save power and reduce wear.
Reduces interference during AM radio recordings.
Connect an external FM antenna for improved reception.
Adjusts alarm volume to a comfortable level.
Instructions for plugging the device into a standard AC outlet.
Steps to install a 9-volt battery for power failure backup.
Understanding and responding to the battery sentinel indicator lights.
Step-by-step guide to tuning and listening to AM/FM stereo radio.
Setting the device to automatically turn off after a specified time.
Instructions for properly inserting a cassette tape into the player.
Steps to play audio from a cassette tape and adjust settings.
Setting the sleep timer for cassette playback.
Guide to making live stereo recordings using the internal microphone.
Steps to record AM/FM radio programs onto a cassette tape.
Instructions for setting up timed radio recordings when not present.
Procedure for setting the current time on the clock.
Steps to configure the first alarm time and source.
Steps to configure the second alarm time and source.
Choosing alarm sound (buzzer, radio, tape) and source.
Information on cassette tape erase protection tabs and their management.
Methods for erasing cassette tapes and correcting tape tension.
Guidelines for connecting and using earphones, prioritizing hearing safety.
Recommendations for safe listening volume levels to prevent hearing damage.
Warnings against wearing earphones while operating vehicles or bicycles.
Recommendations for keeping the Chronosette-276 dry, clean, and protected.
Advice on battery usage, maintenance, and warranty considerations.
Technical details for AM and FM radio reception capabilities.
Technical details for tape speed, erasing, and recording systems.
Power, dimensions, temperature, and AM band speaker impedance.
Detailed AM band performance metrics including distortion and calibration.
Detailed FM band performance metrics including impedance and modulation.
FM sensitivity, S/N ratio, limiting, and rejection specifications.
FM dial calibration, output power, and separation specifications.
Operating voltage specifications for the clock and alarm backup.
Output power, distortion, S/N, and tape specs for the cassette player.
