Radio Shack CTR-117 User Manual

6
Operation
Use an
1
/
8
-inch (3.5 mm) patch cord to
connect the recorder’s
AUX
jack to the
audio source’s audio output jack.
!
Operation
You can use your recorder to make re-
cordings or to play your favorite cassette
tapes.
LOADING A CASSETTE
TAPE
1. Take up any slack in the tape by
turning the hub with a pencil. If you
do not remove excess slack, the
tape might become tangled in the
record/playback mechanism. Avoid
touching the tape.
2. Press
STOP/EJECT
to open the cas-
sette compartment door.
3. Insert a cassette into the door’s tape
guides with the side you want to
play facing up and the exposed tape
edge facing you.
4. Close the cassette compartment
door.
PLAYING A CASSETTE
TAPE
1. Load a cassette tape.
2. Press
PLAY.
The tape begins to play,
moving from the left reel to the right
reel.

Radio Shack CTR-117 Specifications

General

Brand	Radio Shack
Model	CTR-117
Category	Cassette Player
Language	English