14
Care
1. With a Phillips screwdriver, remove
the screws from the back of the stop-
watch, then lift off the back.
2. Remove the screws on each side of
the metal plate and lift it off.
3. Replace the old battery with a new
battery, positive (+) side up.
4. Replace the metal plate and secure
it with the screws.
5. Press the
RESET
pad to reset the
stopwatch. All the display charac-
ters appear on the display for about
2 seconds.
J?C;, then '(0&& appears.
Note:
After replacing the battery, you
must reset the stopwatch to resume
operation.
63-5017.fm Page 14 Wednesday, June 13, 2001 7:18 AM
To Next Page
Loading...
