Duplicate Frequency Check - automatically notifies you if you
are about to store a frequency you
have already stored, to help avoid
wasting storage space.
Memory Backup - keeps the frequencies stored in
memory during a power loss.
Ten Priority Channels - let you set the scanner so it
checks the next priority channel,
in order, every 2 seconds, so you
do not miss important calls.
Two-Second Scan Delay - delays scanning for about 2 seconds
before moving to another channel
or frequency, so you can hear more
replies.
Lock-Out Function - lets you set your scanner to skip
over specified channels or
frequencies when scanning or
searching.
Liquid Crystal Display - makes it easy to view and change
programming information.
Backlit Display - makes the scanner easy to read
in low light conditions.
Two Power Options - let you power the scanner from
standard AC power (with the
supplied AC power cord) or your
vehicle's battery (with an optional
DC cigarette -lighter power cord).
Frequency Data Loading - lets you program the scanner
with frequencies stored in a
personal computer. You need a
personal computer and a data
interface kit (available through
your local Radio Shack store) to use
this feature.
Your PRO-2041 scanner can receive all of these frequencies:
29-54 MHz (10-Meter Amateur Radio, VHF Lo, 6-Meter Amateur Radio)
108-136.975 MHz (Aircraft)
137-174 MHz (Government, 2-Meter Amateur Radio, VHF Hi)
380-512 MHz (Military Aircraft, UHF Lo, 70 -Centimeter Amateur Radio,
UHF "T" Band, Government)
806-824 MHz (UHF Public Service)
849-869 MHz (UHF Hi)
894-960 MHz (UHF Hi, 33-Centimeter Amateur Radio)
To Next Page
Loading...
