Just keep in mind - you search frequencies and scan channels.
A LOOK AT THE KEYPAD
Your scanner's keys might seem confusing at first, but this information
should help you understand each key's function.
BAND - selects a preprogrammed search band.
SCAN - scans through the programmed channels.
MANUAL - stops scanning to let you directly enter a channel number.
AUTO - automatically programs frequencies into channels.
WX - scans through the 11 preprogra mmed weather channels.
PRIORITY - sets and turns on and off priority for 10 priority channels.
AM/FM - changes the receive mode.
PROGRAM - lets you program frequencies into channels.
LIMIT - sets the frequency range you want to search.
UP ARROW and - searches up or down from the currently displayed.
DOWN ARROW
MONITOR - accesses the 40 monitor memories.
DELAY - programs a 2-second delay for the selected channel.
L/OUT - lets you lock out selected channels or frequencies so they
will not be scanned or searched.
L/OUT REVIEW - lets you review locked-out channels or frequencies.
CLEAR - clears an incorrect entry.
Number Keys - each key has a single-digit label and a range of numbers.
Use the digits on the keys to enter the numbers for a
channel or a frequency. Use the range of numbers above
the key (41-80, for example) to select the channels in a
channels in a channel-storage bank.
DIRECT/Symbol - starts a direct frequency search or enters a decimal
point (necessary when programming frequencies).
ENTER - enters frequencies into channels.
A LOOK AT THE DISPLAY
The display has indicators that show the scanner's current operation.
A quick look at the display will help you understand how to operate
your scanner.
MANUAL - appears when you manually select a channel.
To Next Page
Loading...
