Item
Unit Nominal
Limit
Distortion at 50
mWoutput
at 162.400 MHz
% 1.7 6
at 127.175 MHz % 3.0
10
Acceptable radio frequency displacement (EIA RS-204-D)
at 162.400 MHz
kHz
±6
±3
IF rejection (380.7 MHz)
at 162.4 MHz
dB 90 50
Residual noise (Vol.: min, SQ: Open) mV 0.5 5
Scan/Search rate
Scan
CH/sec. 50
25
Search (162.4 - 163.4 MHz)
Step/sec.
100
50
Scan delay
Sec. 2
1 - 5
Current drain (at 162.40 MHz)
(at full output)
mADC
436 500
(at Squelched)
mADC
230
320
Note:
Nominal specs represent the design specs. All units should be able to approximate these - some will
exceed and some may drop slightly below these specs. Limit specs represent the absolute worst condition that still
might be considered acceptable; in no case should a unit fail to meet limit specs.
-5-
To Next Page
Loading...
