14
DEMONSTRATING ALERTS
To familiarize yourself with the different alerts your detector
sounds, you can run a demonstration. To start the demonstra-
tion, press and release
MUTE
and
CITY
at the same time with
the detector turned on. The detector displays
TEACH
, then
demonstrates the alerts for X, K, Ka, laser, VG-2, and all 60
safety warning system messages, in that order. To stop the
demonstration, hold down
PWR
.
MUTING ALERTS
While a radar, laser, or safety warning alert is sounding, you
can press
MUTE
to temporarily silence the detector for the cur-
rent alert and any new alert that it receives within 20 seconds.
Visual alerts are not affected.
USING AUTO QUIET
Auto Quiet reduces the selected audio level to a minimum level
about 5 seconds after it detects a radar signal. The audio alert
sounds at the minimum level for any new signal received within
20 seconds. VG-2 or laser alerts are not affected.
To turn on Auto Quiet, press
MUTE
when the detector is not
sounding an alert. The detector displays
AUTO
then
QUIET
.
To turn off Auto Quiet, press
MUTE
when the detector is not
sounding an alert.
To Next Page
Loading...