16
REPLACING THE FUSE
The TRC-499’s 2-amp fuse helps
protect your CB from power surges
and short circuits. If the fuse is blown,
replace it with a 2-amp, fast-acting
glass fuse (Cat. No. 270-1007).
Follow these steps to replace the
fuse.
1. Make sure the power source
and CB are both turned off.
2. To open the fuse holder, push
the fuse holder ends together,
then turn either end counter-
clockwise and release it.
3. If the fuse is blown, replace it.
Caution:
Make sure you replace
the fuse only with another fuse
of the same type and rating.
4. To close the fuse holder, push
the fuse holder ends together,
then turn either end clockwise.
21-1599.fm Page 16 Thursday, August 5, 1999 10:59 AM
To Next Page
Loading...
Need help?
General
