Radio Shack TRS-80 MICRO User Manual

Connection
and
Self-Test
Plug
the
AC
cord
into
the
AC
Connector
on
the
back
of the
Printer.
Plug
the
other
end
into
a
3-prong,
grounded
AC
outlet.
Before
connecting
the
Printer
to
the
Computer
(or
Interface),
perform
the Printer
Self-Test.
1
.
Turn
the
Printer
on.
The
power
switch
is
located
on
the
rear
of
the
unit,
just
above
the
AC
Connec-
tor.
Note:
Do
not
perform
the
Self-Test
unless
the
Printer
is
loaded
with
full
size
paper.
Otherwise
characters
will
be
printed
on
the
platen.
mmmmi
2.
Set
to
OFF
LINE
on
the
control
panel
shown
next
page.
3.
Press
the
TEST
switch.
It
is
on
rear
above
the
interface
connector.
The
Printer
should
print
a
line
of
test
characters.
IIMM5SHS!
Interface Connectoi
4.
Adjust
Copy
Control
and/or
Impression
Control
for
best printing
quality.
5.
Turn
off
the
Printer.
Now
you've
finished
the
Self-Test.
Connect
the
Interface
Cable
to
the jack
on the
back of
the
Printer.
Connect
the
other
end
to
the
TRS-80
system.
14

Radio Shack TRS-80 MICRO Specifications

General

Brand	Radio Shack
Model	TRS-80 MICRO
Category	Printer
Language	English