Radio Shack TRS-80 Model III User Manual

OPERATION
2
/
Installation
Carefully unpack
the
Computer. Remove all
packing material
and save it in case
you ever need to transport the Computer.
Be
sure to locate all cables, papers, etc.
,
that
may
be included in the shipping carton.
Place
the Computer on the surface where you'll be using
it. An
appropriate power
source should be nearby, so that no extension cord will be required.
Do
not connect the Computer to the AC power source yet.
Connection of Peripherals
Before connecting any peripherals (for example,
line printer and
cassette recorder),
make sure the Computer and
the
peripheral
devices
are
turned off.
Connect
all peripherals to the
appropriate jacks on the
bottom and rear of
the
Computer. Refer to Figure
1
for
location of connection points.
For
interconnections
between
cables and peripherals, refer
to the Owner's
Manual supplied
with the
peripheral device.
Note: All cables should exit
to
the rear of the
unit
so
that
no binding
occurs.

Radio Shack TRS-80 Model III Specifications

General

Brand	Radio Shack
Model	TRS-80 Model III
Category	Desktop
Language	English