Radio Shack TRS-80 PC-3

Because you recalled using the CB ' the flashing cursor is now positioned over the first character in the display. To correct this
entry, you need to insert another zero. Using the CB ,move the cursor until it is positioned over the zero. When making an
INSert,
position the flashing cursor over the character before which you wish to make the insertion.
Input
Use the I NSert key no make space for the needed character.
Display
Display
Pressing INSert moves
all the characters one space to the right, and inserts a bracketed open slot. The flashing cursor is now posi-
tioned over this open space, indicating the location of the next typed input. Type in your zero. Once the entry is corrected,
display your new result.
Input Display
29
60.