To complete the
initiaFiiation
of
the
CP/M
hard drive,
do
the
following:
1. Remove the TRSDOS Initialization Diskette from Floppy
Drive and replace it with either CP/M Disk 1 (lor 54K Model 4
or
4P)
or
CP/M
Disk
2
(for
136K
Model
4
or
4P).
2. Reset the system to boot under CP/M; then answer the date
and
time
prompts.
3. Place CP/M Disk 5 in Floppy
Drive
B,
and give CP/M
informa-
tion
about
your hard
disks by
typing
the
loilowmg
lines:
SETUP
;EHtlWi
2
3
V
2
E
T
You
are
telling CP/M thai
you are about
to
use
hard drives
and,
because the
one
you wish
to
initialize
is
the
second
physical
drive, you are teliing it that 2 drives exist. The last line
tells
CP/M to test the updated conliguralion
and
return to the
system.
4. Type these
lines
to
initialize
the CP/M
directory
and to
reiurn
to ihe system:
CPMINIT
rEBTEtn
1
5
2
r
E
5. Type these lines to copy files from Drive A
to
Drive
F and
to
return to the system:
A; [EHIEE (change
default
drive)
PIP
: ^hter;
(peripheral
interchange
program)
F:=A:V
(enter!
(copy non-system files from A
lo
F)
f
ENTER!
(return
to ihe system prompt)
52
To Next Page
Loading...
