6
Preparation
Cautions:
• For added safety and to protect your
amplifier and auto sound system, dis-
connect the cable from your vehicle’s
negative (
–
) battery terminal before you
begin.
• Be sure your speakers can handle as
much as 260 watts of power (130 watts
per channel if you connect your auto
sound system to one pair of speakers
and bridge the amplifier’s outputs, or 65
watts per channel if you connect your
auto sound system to two pairs of
speakers or one pair of speakers and a
subwoofer). Each speaker must have an
impedance of at least 4 ohms. Your local
RadioShack store carries a full line of
speakers.
To make it easier to gauge wire length and
connect the amplifier, temporarily place the
amplifier as close as possible to the selected
mounting location.
12-2017.fm Page 6 Tuesday, May 9, 2000 10:02 AM
To Next Page
Loading...
Need help?
General
