CALIBRATE
Your thermostat was accurately calibrated at the factory to ±1° F of actual ambient
temperature. You do have the option, however, to change the display temperature to match that of a
previous thermostat, or to match another thermostat already in your home. The range of change is
from -6°F to +6°F or -3°C to +3°C.
To change your Thermostat Calibration, touch MENU and then touch CALIBRATE.
Use the + / - to adjust the displayed temperature up or down, as desired.
The DELTA FACTOR that appears on the screen will also automatically increase or decrease
for each 0.5° (F or C) adjustment so you can see your change. The large display will show the
temperature.
Touch
to return to the Home screen.
DIFF (Used for multiple stage systems only, not on screen for single stage)
The differential is the number of degrees between the room temperature and the Target Temperature
at which the 2nd stage will be used. DIFF may be set to a different value for HEAT or COOL. Default
is 2°F , range is 2°F to 6°F (1°- 3°C).
To set the differential for the current mode, touch MENU and then DIFF. Use the arrows to set the
DIFF. Recommend 2°F for very cold climates and 6°F for warm climates.
To Next Page
Loading...
Need help?
General
