EasyManuals Logo

Radio Thermostat CT30 User Manual

Radio Thermostat CT30
16 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
PG 16
PG 16
Compressor Protection The CT30 has a minimum cycle time of 4 minutes to protect your
compressor in cool and in heat pump (if you have one). The Home screen will show a small clock and
A/C during this time and the compressor will not come on until the 4 minute delay is over.
Communicating Thermostat
The CT30 has 2 RTM-1 radio ports. These allow your thermostat
to communicate with other systems.
Using USNAP Radios The USNAP ports allow you to connect
your CT30 to a wireless network. This can give you access to your
home’s HVAC system even when you are away. It can also give
you access to web based efcient energy management sites that
can help you save money and protect the environment.
To Insert a USNAP radio module:
Power off the CT30. Insert the radio module in either slot on the
back of the CT30. Power up CT30.
To connect to a network follow the instructions that came with the
USNAP module.
USNAP port
USNAP
radio
Caution
DO NOT INSERT or REMOVE USNAP radio
modules if power is ON. This can damage the
thermostat or radio modules.

Other manuals for Radio Thermostat CT30

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radio Thermostat CT30 and is the answer not in the manual?

Radio Thermostat CT30 Specifications

General IconGeneral
BrandRadio Thermostat
ModelCT30
CategoryThermostat
LanguageEnglish

Related product manuals