(frequency point) to continue scanning.
6.7 Squelch Setting
Short press the "SQ" key to set the squelch level. Use the
Up/Down key to adjust the level, or directly input the desired level
using the numeric keys. When the setting is complete, press the
"CAN" or "SQ" button again to exit the setting.
Press and hold "SQ" key for 3 seconds to turn on forced
monitoring.
6.8 Backlight Brightness Setting
Short press the "Brightness" button to set the backlight
brightness level. Adjust the level using the plus/minus key or
directly input the desired level using the numeric keys. Press the
"Cancel" or "Squelch" button again to exit the setting.
6.9 Call Function
Press the Select Call key to make a call. Choose from 1-5
different call tones.
6.10 VOX Function
Press the VOX button on the speaker to turn the VOX function
on or off. To adjust the VOX level, press "*" on the microphone to
To Next Page
Loading...