6.3 Frequency Mode and GMRS Channel Mode Switching
Press the "Mode" button on the panel or the "Mode" key on
the hand-mic to switch between GMRS channel mode and VFO
mode.
6.4 Frequency Mode Frequency Step Selection
Press the numeric keys to set the frequency directly.
Alternatively, press the "*" to enter the frequency step setting
menu and choose from 5k, 6.25k, 12.5k, or 25k steps.
6.5 Memory Frequencies
In the frequency mode, press the memory key to display the
prompt "press MX to memorize the frequency." Then, press
M1/M2/M3 to record the current frequency.
To quickly switch to the recorded frequency, you can short
press M1/M2/M3.
6.6 Scanning
In channel mode, press "SCAN" to perform channel scanning;
In VFO mode, press "SCAN" to perform frequency scanning, and
the scanning range can be set in the menu. Press "RECORD" to
save the useful frequency points. Press up and down to switch
between forward and reverse scanning or skip the useful channel
To Next Page
Loading...