Radioddity GD77 - User Manual

OPENGD77 – Cheatsheet
• The [BLUE] key is also referred to as the [FUNCTION] key.
• The [GREEN] key as the [MENU] key.
• The [ORANGE] key as the [QUICK MENU] key.
The [BLACK] key is held on switch on to enable Hotspot mode when connected to a Raspberry pi running pi-
star by the programming USB cable.
Radioddity GD77
PTT
S1
Fn
ON + Fn = Reset Radio
ON + Fn + S1 = Firmware mode
PTT + S1 = Show Last heard list
Fn + = Power
Fn + = DMR <-> FM on current freq
*
MENU = Menu / Item Selection
Back / Cancel / Exit
MENU
Fn + = Ch details
Quick Menu
- FM = VFO <-> Ch
- DMR = Filter (TS, CC, CTSS)
- BACK to exit
Locks
MENU
, = Lock keypad
*
MENU
, = Lock PTT#
Fn + = Unlock PTT, keypad
*
S1 = Backlight on (if Manual
set in Display options)
On/OFF
Volume
PTT + Fn = (FM) 1750Hz tone
= Toggle TS1, TS2 (DMR)
*
# = Enter DMR TG ID
to confirm
MENU
= return to prev TG
Fn + S1 = RX <-> TX (repeater input)
# # = start Private Call
(Enter DMR ID and )
Fn + to exit.
MENU
Back
Private Call
# # # = select Digital Contact
Use to scroll. to call.
to exit.
(Override DMR id with Fn + #
until reboot or
Fn + = permanent)
MENU
Back
MENU
DMR FM
SquelchTG up/dn
Freq up/dnChan up/dn
S1 Show Freq Show offsets, sq%
Fn+
VFO Rx/Tx focusZone up/dn
OpenGD77 Cheatsheet
PTT + numeric = (FM) DTMF tone
- VFO -> new channel
- Fn + = bs, Fn + = space
- alphanumeric keypad
- saves
MENU
- Fn + saves permanently
MENU
Channel / Contact
Editing
Inverted display indicates receiving
on different TG to current Tx.
- Click Fn to set Tx to received TG .
DMR Talkgroups
- selects
MENU
= Scan / exit
(long)
Scanning
While scanning:
= reverse scan direction
= skip nuisance channel
= skip once
Fn + numeric = useful shortcut
Shortcuts
Channel / VFO toggle
- Double = toggle VFO A/B
21
*
8 #
3
5
9
64 0
7

Radioddity GD77 Specifications