30 Chapter 1
Working in Routine mode
In “ROUTINE” mode you are guided at every step, thanks to the clear-
text messages and the icons present on the large graphic display.
Access methods
A Routine operator has access to all the displays for checking purposes.
Running methods
When working in “ROUTINE” mode, it is necessary to install your titra-
tion system according to the selected method or sequence, prior to run-
ning a method or sequence.
1. Selectthemethod
Refer to chapter 4.
2. Check icons
The following icons indicate the exact state of your working system (see
page 6).
3. Running methods
To run a method or sequence, refer to chapter 4.
To Next Page
Loading...
