RADIOMETER TCM3 - Page 20

2. TCM3
TCMS and TCM30 Service Manual
Introduction
Checkout and This Section describes the necessary procedures for checking and adjusting the
Adjustment TCM3.
For TCM3 with serial nos. from 101R22N01 onwards, some test procedures differ
considerably from the procedures for the TCM3 below RUN 22.
Yearly RADIOMETER recommends a yearly preventive maintenance checkout which
Maintenance includes:
Checkout and Adjustment.
Monitor Performance Check.
These procedures are outlined in the following two paragraphs.
Repairs Repairs to TCM3 are made only by replacing defective PCBs, which are returned
9-14
to RADIOMETER for exchange. This is to ensure patient and functional safety.
199808.1