RADIOMETER TCM3 - Page 93

TCM3 and TCM30 Service Manual 2. TCM3
Serial Output, Continued
Category D
(continued)
10082 1
Event Mark (TA Package)
Transmitted where the alarm-off key was pressed.
Line ID. TA
Field ID: AO
Exit From Setup Program (TU Package)
LineID: TU
Field ID: Same contents as for line XS (category B) with the following
modifications: The line includes only fields corresponding to values
that were changed or reset (site timer). If no values were changed, the
line is omitted.
The line does not include calibration values.
Exit From AUX Program (TF Package)
Line ID: TF
Field ID: Contains the fields TC and MF of the XF line (category B). The line is
only transmitted if the temperature correction or the metabolic factor
was changed
In-vivo Cal. Completion (TV Package)
Line ID. TY
Field ID: Same contents as XV line (category B)
2.77