Radionics D2112 Diagnostic Manual

1
Radionics, Inc.
74-07113-000-B 4/94
D2112 Keypad
Diagnostics
Putting the Keypad into the
Diagnostics Mode
1. Lock the D2112's
Standby Switch down.
2. Press the 1 key on the
keypad.
3. Enter your “Installer”
passcode. The default
Installer passcode is
654321. The default
passcode length is 3, so
if you have not changed
the default entries, press
654.
Lights on the keypad
indicate the functions
that are available.
Now that you’re in...
When you select a function
the light next to the key winks
to let you know what function
you are in. Once inside a
function, press ( CLEAR ) to
return to the previous level.
1 Bell Test
2 Battery
3 Comm-
4
5 Point
6 Relays
7 Power
8 Program
Status
unication
Supply
74-07113-000-B 4/94 © 1994 Radionics

Radionics D2112 Specifications

General

Brand	Radionics
Model	D2112
Category	Security System
Language	English