Need help?Do you have a question about the Radionics Easikey 1000 Plus and is the answer not in the manual?
General| Category | IP Access Controllers |
|---|---|
| Manufacturer | Radionics |
| Model | Easikey 1000 Plus |
| Input Voltage | 12V DC |
| Communication Interface | RS-485 |
Describes how the Easikey 1000 system functions when a user presents a key/card.
Selecting the best location for the controller and installing the required power supply.
Details on Door Monitoring, Reader Tamper Detection, and Alarm Relays for the EK1000 Plus.
Functionality of reader tamper detection and specifications for lock outputs.
Mandatory installation of emergency override switches for fire doors and escape routes.
How alarm relays activate based on system alarms like Unauthorized Access or Tamper.
Covers Master and Sub Editor key/cards, their functions, and editor time-out settings.
Details the alarm triggered by reader cable or physical reader tampering.
Explains how alarm relays activate based on system alarms.
Procedure for applying power and installing the Master Editor key/card.
Step-by-step guide for programming a new Sub Editor key/card into the system.
Feature to prevent users from exiting and re-entering without a proper sequence.
Methods for manually locking or unlocking doors, considering Time Profile interactions.
Explanation of how the EK1000 assigns and manages user key/card numbers.
Procedure for adding new key/cards or editing existing user information.
Explanation of how the EK1000 records and prints system transactions.
To Next Page