RADLEY 5125-015 - User Manual

The Radley 15 Amp Electric Lawn Mower is a corded lawn care tool designed for residential use, offering a 3-year limited warranty. It operates on a 120V~60 Hz power supply and features a 15 Amp motor with a no-load speed of 3200 RPM. The mower has a clearing width of 15-3/4 inches (40cm) and a grass bag capacity of 45 liters (12 gallons). Weighing 28.7 lbs (13kg), it is designed to be relatively lightweight and maneuverable.

Function Description:

The Radley Electric Lawn Mower is used for cutting grass in residential lawns. It is a push-type mower, meaning the user walks behind it to guide its operation. The mower is equipped with a cutting blade that rotates at high speed to trim grass evenly. It includes a grass catcher for collecting clippings, or it can be used for mulching by inserting a mulching plate (not explicitly detailed but implied by "mulcher function" and "remove plate to use the grass catcher").

Important Technical Specifications:

• Voltage: 120 V~
• Frequency: 60 Hz
• Ampere: 15 A
• No-load speed: 3200 RPM
• Clearing width: 15-3/4" / 40cm
• Bag capacity: 45L (12 gallons)
• Weight: 28.7 Lbs / 13kg
• Cutting height levels: 6 adjustable levels, from 1" (25mm) to 3" (75mm)
• Protection class: II (Double insulation)
• Sound power level: Guaranteed value in dB (specific value not provided, indicated as "XX dB")
• Extension cord requirements: Minimum 14 gauge wire for a 15 AMP circuit, protected by a time-delayed fuse or circuit breaker. Specific gauge recommendations vary by cord length (e.g., 18 AWG for 25'/7.5m, 16 AWG for 50'/15m, 14 AWG for 100'/30m).

Usage Features:

• Starting/Stopping: The mower is started by plugging it in, standing behind the grip handle, holding the safety lock-off switch, and pulling the start lever. Releasing the start lever stops the mower.
• Cutting Height Adjustment: The mower features a height adjustment lever that allows users to select one of six cutting heights, ranging from 1 inch (25mm) to 3 inches (75mm). This is done by pressing the lever towards the rear wheel, moving it to the desired height, and ensuring it engages properly in the slot.
• Grass Collection/Mulching: The mower can be used with a grass catcher to collect clippings. The grass catcher has a full bag indicator. Alternatively, a mulching function can be used by inserting a mulching plate and not installing the grass catcher.
• Operation on Slopes: Users are advised to mow across the face of slopes, never up and down, and to exercise extreme caution when changing direction on slopes. Excessively steep slopes should be avoided.
• Safety Lock-off Switch: A safety lock-off switch is integrated into the handle to prevent accidental starting.
• Cord Management: The manual provides instructions for making a knot in the extension cord to reduce the risk of disconnection during operation.
• Visibility: The product should be operated in daylight or good artificial light.
• Wet Grass: Avoid operating the product in wet grass to prevent clippings from sticking and to reduce the risk of slipping.
• Mowing Pattern: The most effective mowing pattern involves straight, slightly overlapping rows.
• Foreign Objects: If the mower strikes a foreign object, it should be stopped immediately, inspected for damage, and any damage repaired before restarting.

Maintenance Features:

• General Cleaning: The mower should be cleaned with a dry cloth after each use. Stubborn dust can be removed with high-pressure air (43 PSI). The underbody and cutting device should be kept clean and free of debris.
• Blade Maintenance: The blade should be kept sharp for good cutting performance. Worn or damaged blades should be replaced with new ones of the same type or sharpened by a qualified specialist. The hex bolt securing the blade should be tightened to 33-44 Ft./Lbs. to ensure safe operation. The cutting device should be replaced after 50 hours of mowing or 2 years, whichever comes sooner, or immediately if cracked or damaged. The blade should be lubricated with light machine oil after each use.
• Grass Catcher Maintenance: The grass catcher should be inspected before each use for damage and cleaned with water and mild soap after operation. It should be dried thoroughly before storage to prevent mildew.
• Fastener Checks: All nuts, bolts, and screws should be checked periodically for tightness.
• Storage: The mower should be stored in a dry, frost-free place, inaccessible to children, at a temperature between 50°F/10°C and 86°F/30°C. It is recommended to use the original packaging or a suitable cover to protect it from dust.
• Control Cord: The control cord should be checked before each use for defects or looseness.
• Safety During Maintenance: Always switch off the product, remove the power plug, and allow the product to cool down before performing any inspection, maintenance, or cleaning work. Wear strong work gloves when handling the cutting device.
• Replacement Parts: Only genuine replacement parts and accessories should be used for safety and to prevent damage. Electrical repairs should only be performed by a qualified technician.