Rado Ceramica Multifunction User Manual

INSTRUCTIONS
FOR USE
Your Rado ‘Multifunction’ is not
only an exceptional piece of jewel-
lery with an absolutely uncompro-
mising avant-garde design; it also
offers seven useful additional func-
tions, which can be easily accessed
via the crown.
Function selection
Leave crown in normal position
and turn.
Function adjustment
Pull crown out and turn.
Switching function on or off
Press crown briefly.
Setting to zero
Press crown (at least 3 sec.)

Rado Ceramica Multifunction Specifications

General

Brand	Rado
Model	Ceramica Multifunction
Category	Watch
Language	English

Summary

Setting Digital Time Display

Hours and Minutes

Set hours by turning crown quickly, minutes by turning slowly. Push crown back to normal position.

Seconds in Digital Display

Pull out crown, push in again. Seconds flash for one minute. Press crown briefly to set seconds to zero.

Synchronisation of Analogue and Digital Displays

Set digital time to 24-hour display. Pull out crown and turn until both displays match.

Setting the Date

Date Adjustment and Leap Year

Quickly alter month, slowly alter date. Correct 29th Feb by setting date back one day.

Adjusting Day-of-the-Week Display

Setting Language and Day

Day display flashes. Select language (e/f/s/d) and set day by turning crown.

Timer Function

Different Time Zone (T2)

24-Hour or 12-Hour Display

Check display by pressing crown. Press again to change between 24-hour and 2x12 hour (AM/PM) modes.

Stopwatch (CHR)

Alarm (AL)

Setting and Activating Alarm

Set hours/minutes for alarm. Press crown briefly to activate/deactivate acoustic signal.

Analogue Display Only

Battery Information