[Home Tab]
•
Bluetooth Option
•
Buffer Length (EarStudio F/W ver.1.2.1 or Over / App ver 1.4.0 or Over)
-
Shorter buffer can reduce little amount of the latency, but it may cause audio lag
in poor RF environment. The buffer length of 7 or higher is strongly
recommended for seamless audio streaming.
-
The buffer length option is available only when Bluetooth audio streaming is not
active.
•
Codec Option (EarStudio F/W ver.1.1.8 or Over / App ver 1.2.0 or Over)
-
Codec option provides an auxiliary way to limit the choice for the transmitter, and
to have preferred codec for the user.
-
The selection of the active codec entirely depends on the transmitter's
(SmartPhone) policy.
•
HD Jitter Cleaner
-
HD Jitter Cleaner enhances the phase accuracy, removing the additional jitter
caused by the inter clock mismatch between source and sink devices.
-
Able to set the values for Bluetooth playback and USB playback separately.
•
USB Connection Option
To Next Page
Loading...