•
Battery care (EarStudio F/W ver.1.3.0 or Over / App ver 1.6.0 or Over)
: The battery would be charged up to 80~90% only depending on the condition.
This could help maximize the battery life.
•
Charger mode (EarStudio F/W ver.1.2.0 or Over / App ver 1.3.0 or Over)
-
Normal Mode
: When connected/disconnected to USB charger or Host PC, ES100 will reset
the system automatically.
-
Auto Power Off when Charger Connected
: When connected to USB charger, ES100 will be turned off. When connected to
Host PC, ES100 will stay turned on as a USB DAC.
-
Auto Power Off when Charger Disconnected
: When disconnected to USB charger or Host PC, ES100 will be turned off. For a
dedicated preamplifier use case to Car Aux-in, this mode turns on and off ES100
upon the presence of USB power source from the vehicle.
•
Power Mode
-
EarStudio’s USB Power Mode can be set to Self-Powered Mode.
Use it when USB Host requires Self-powered Mode when connecting to an
iPhone using an Apple Camera Kit
-
When Battery is low, the Self-Powered mode is automatically released when the
USB cable is connected.
※
WARNING
In Self-Powered mode, EarStudio will not charge even when the charger is
connected, so you must manually set it to Normal Mode before charging.
•
Output Mode
To Next Page
Loading...