7. CLEANING AND MAINTENANCE
7.1. Notes and Warnings
7.2. Cleaning Tips
Avoid using aggressive cleaning
agents (e.g. solvents, cleansers
containing chlorine, corrosive
substances or bleach).
• Clean plastic components using a soft cloth slightly moistened with a solution of water
and a mild detergent (e.g. soap or dishwashing liquid).
• Dry cleaned elements using soft and dry cloth or use dust-free paper
towel to absorb the remaining moisture.
• Do not install the components until they are completely dry.
Do not use cleansers containing
abrasive substances or scouring
preparations.
Make sure that no dust or liquid
enters the sockets and the inside
of the indicator.
Prior to cleaning it is necessary to
disconnect the scale from the mains.
Unplug the connector from the
electrical socket.
For cleaning use only soft cloths made
of microfiber. Do not use any abrasive
cloths or any material that may scratch
the surface!
Apply the cleanser onto the cloth first.
Avoid applying the cleanser directly
onto the device!
To Next Page
Loading...
Need help?
General
