RADWAG PUE HX7

7. CLEANING AND MAINTENANCE
Avoid using aggressive cleaning
agents (e.g. solvents, cleansers
containing chlorine, corrosive
substances and bleach).
• STAINLESSSTEELELEMENTS,ALUMINUMcanbecleanedwithasoftclothslightlymoistenedwithasolutionofwater
and a mild detergent (e.g. soap or dishwashing liquid).
• Plastic elements canbecleanedwith a soft cloth slightly moistenedwith a solutionof water anda milddetergent
(e.g. soap or dishwashing liquid).
•Drycleanedelementsusingsoftanddryclothorusedust-freepapertoweltoabsorbtheremainingmoisture.
•Donotinstallthecomponentsuntiltheyarecompletelydry.
Avoid using cleansers containing
abrasive substances or scouring
preparations.
Avoid using intense water jet for
cleaning.
7.2. Cleaning Tips
Prior to cleaning it is necessary
to disconnect the indicator from
the mains. Unplug the connector
from the electrical socket. Unused
communication interfaces must be
covered with hole plugs.
For cleaning use only soft cloths made
of microfiber. Do not use any abrasive
cloths or any material that may scratch
the surface!
Apply the cleanser onto the cloth first.
Avoid applying the cleanser directly
onto the device!
7.1. Notes and Warnings