Lost or forgotten VLAN ID Chapter 8
RADWIN 2000 User Manual Release 2.6.40 8-9
Figure 8-6: Configuring management traffic VLAN Settings
Lost or forgotten VLAN ID
If the VLAN ID is forgotten or there is no VLAN traffic connected to the ODU, then reset the
relevant ODU.
During the first two minutes of connection, the ODU uses management packets both with and
without VLAN. You may use this period to reconfigure the VLAN ID and priority.
Enable / Disable Protocols
For a link managed in a network, direct access to an ODU using Telnet is considered to be a
security breach. Telnet access may be enabled or disabled by clicking the Protocol tab and
enabling/disabling Telnet access using the Telnet check-box:
To Next Page
