Displaying the Inventory Chapter 8
RADWIN 2000 User Manual Release 2.6.40 8-10
Figure 8-7: Enable/Disable Telnet Access and Web Interface
For further details about Telnet access see page 8-40.
The Web Interface enables limited configuration capability using a Web browser. For further
details see Chapter 26.
Both of these access modes when available, are site specific. If for example, site A is the
operator site and site B the client site, you may wish to disable these protocols for site B but
leave them enabled for site A.
Displaying the Inventory
To view the inventory data
1. Choose a site from the main menu.
The Configuration dialog box opens.
2. Choose Inventory.
Note
If either access mode poses a general security risk, you must disable them
for each site separately.
To Next Page
Loading...
