Restoring ODU Software or Configuration Chapter 8
RADWIN 2000 User Manual Release 2.6.40 8-39
...
To backup the ODU software a file:
1. Choose a site to back up. The Site Configuration dialog box opens.
2. Click Backup.
3. In the Save As dialog box, indicate in which folder and under what name configura-
tion file is to be saved, and click Save.
Restoring ODU Software or Configuration
Backup files can be uploaded from the managing computer. You may choose a full software
restore or configuration-only restore.
To restore from a backup file:
1. Choose a site to restore (from a previous backup).
The Site Configuration dialog box opens.
2. Click Restore. You are offered the choice of a Full or Configuration Restore as
shown:
3. Click the required Restore type. You are then offered a standard Open File dialog
box.
4. From the Open File dialog box, navigate to your backup storage area and choose file
to upload. Click OK.
Muting the alignment tone buzzer
The ODU alignment tone becomes audible as soon as power is supplied, and continues until
the ODUs are aligned and the link established.
It is possible to mute the tone during regular operation of the link. It must be enabled when
performing the alignment procedure.
To mute the alignment tone buzzer:
1. Choose a site. The Configuration dialog box opens.
2. In the Configuration dialog box, click the Buzzer button.
To Next Page
Loading...
