Upgrading an Installed Link Chapter 15
RADWIN 2000 User Manual Release 2.6.40 15-3
Figure 15-3: Adding a single site for upgrade
Enter the IP address of the site, the Community strings (Default:
public
and
net-
man
, respectively) and then click OK. The site will appear in the Software Upgrade
list box. For example if we add the site at IP address 192.168.2.101, the SWU main
window of Figure 15-1 looks like this:
Figure 15-4: Single site added for upgrade
The list can be cleared using the Clear All button.
As an alternative to adding sites one at a time, you can add sites from a prepared list
using the Add from File option in Figure 15-2. The list has the following format:
<IP address>,<Read-Only community>,<Read-Write community>
Here is an example:
192.168.1.101,public,netman
192.168.1.102,public,netman
192.168.2.101,public,netman
To Next Page
Loading...
