External Antenna Package Contents Chapter 3
RADWIN 2000 User Manual Release 2.6.40 3-5
Figure 3-6: IDU-C Package contents - the IDU-C, 16 E1/T1 ports
Figure 3-7: IDU-C Package contents - the mounting kit and DC power plugs
External Antenna Package Contents
• Antenna
• RF cable 1m (3’) long; two cables supplied with bipolar antennas, single cable sup-
plied with monopolar antennas
• Mounting kit
Additional Tools and Materials Required
The following is a list of the equipment and materials required to install RADWIN 2000 hard-
ware.
Tools and Materials
• Crimping tool for RJ-45 (if the ODU-IDU cable is without connectors)
• Spanner/wrench 13 mm (½”)
• Drill (for wall mounting only)
•Cable ties
• Sealing material
Cables and connectors
• ODU grounding cable 12AWG
To Next Page
