Radwin 2000 Series - The RADWIN Manager log-on Concept

The RADWIN Manager log-on Concept Chapter 4
RADWIN 2000 User Manual Release 2.6.40 4-5
Figure 4-5: Log on window exposing the user types.
There are three user types:
•An
Observer has read-only access to the link. An Observer can monitor the link, gen-
erate reports, but may not change any link parameters.
•An
Operator can install and configure the link.
•An
Installer can, in addition to functioning as an Operator, also change the operating
band. The latter function has legal ramifications, requiring familiarity with local regula-
tions.
The following table summarizes these options:
The Network Manager should change the default passwords as soon as possible.
 Continuing the log-on procedure:
5. Type an IP address for the ODU (if you connect through a LAN), or click Local Con-
nection (if you are connected directly to the IDU port).
Table 4-2: User types, default passwords and function
User Type
Default
Password
Function Community
Community
String
Observer
admin Monitoring Read-Only public
Operator admin
Installation,
configuration
Read-Write
netman
Installer wireless
Operator plus
set band
Read-Write
netman