Using RADWIN Manager Spectrum View Chapter 4
RADWIN 2000 User Manual Release 2.6.40 4-11
Using RADWIN Manager Spectrum View
Prior to running the Installation Wizard (Chapter 5), you may use the RADWIN Manager
Spectrum View utility.
The RADWIN Manager Spectrum View utility is an RF survey tool designed to support the link
installation prior to full link service activation. The tool provides comprehensive and clear
information enabling easier, faster and better quality installations.
To launch Spectrum View, go to the main window menu (Figure 4-11) and click Tools |
Spectrum View. A display similar to the following appears:
Trap destination 0.0.0.0 0.0.0.0
RADWIN Manager log-on
passwords
Observer admin
Operator admin
Installer wireless
Link ID Link EBG_20561334
Link Name Name TPSF_BTT
Site 1 Site A
Site 2 Site B
Location (per site) Location A B
Name (per site) Name Here There
Contact (per site) Person John Mary
Link Password wireless-bridge
Rate Adaptive
Ethernet Configuration Auto Detect
Radio Link Failure Actions No action
Bridge or Hub mode Hub Mode, Aging time = 300 sec
Community values
Read-write – netman
Read-only – public
Table 4-3: Default Settings (Continued)
Parameter Default Value Illustrative Value
To Next Page
Loading...
