Raex YR1226 User Manual

1
YR1226 Remote Transmitter
YR1226 remote control is used to control the motors. motors fit all
kinds of electric roller blinds, canopies, Roman blinds, Venetian
blinds, projection screens, awnings, and outside solar protections.
This kind of motor integrated with a radio receiver within its casing,
No wiring is required between the motor and its control point, and is
compatible with low voltage switch.
Specification
Transmit modulate: 433.92MHz，ASK
Transmit intensity: +10dBm
Remote channel: 6 channels
Battery: CR2032×1
Remote cradle holder: optional part
Common buttons function:
1. YR1226 transmitter has six channels. Each light is one channel.
Five lights flash at the same time means the sixth channel.
[Channel choose] button can switch circularly any one channel.
2. [Up] [stop] [down] buttons separately transmit different function
signals under the current selected channel.
3. [Channel setting] key is only used to set
remote channels. Please see <setting
methods>.

Raex YR1226 Specifications

General

Brand	Raex
Model	YR1226
Category	Remote Control
Language	English

Summary

YR1226 Remote Transmitter Overview

Specification Details

Technical specifications include transmit modulate, intensity, channels, and battery type.

Common Buttons Functionality

Explains basic button operations for channel selection and transmitting signals.

YR1226 Remote Transmitter Operation Modes

Group Buttons Functionality

Details on how group buttons transmit signals and specific button combinations.

Important Notes and Attention

Key considerations for transmitter behavior, receiver compatibility, and group button usage.

Setting Methods

Instructions for setting remote channels and ensuring signal recording in the receiver.

YR1226 Remote Transmitter Setup Procedures

Setting Remote Channel

Step-by-step guide for setting the remote channel on the transmitter.

Delete Remote Channel

Procedure to delete previously recorded remote channels from the transmitter.

Correcting Motor Direction

Instructions on how to adjust the motor's direction of operation using the transmitter.

FCC Compliance Information

FCC Compliance Statement

Device compliance with Part 15 FCC rules, conditions, and interference guidelines.

Interference Correction Measures

Steps to take if the equipment causes harmful interference to radio or TV reception.