Rage Comet & Comet ‘R’ Maintenance Guide
Issue 2.0 October 2014
Starting your Rage vehicle
The Start Sequence for the Rage Comet ‘R’ (R200RT)
1. If your vehicle is fitted with a ratchet hand brake, it must be “On” in the
up position! If not then this feature is not enabled.
2. Insert the Isolator Key and turn it clockwise to the “On” position.
3. Depress the clutch and brake pedal, preventing a false register on
“start”.
4. Press the Triangle on the remote fob. This initiates the start
sequence and the Start / Stop button on the dash pulsates like a
heartbeat with a blue light.
5. Now press the Start/Stop button for 5 seconds, you will hear the fuel
pump prime first and then the engine will crank and start. During this
process as a visual indicator the blue heart beat will pulsate quicker to
validate that the “Can-Bus” system is correct and all circuits are
functioning correctly.
6. If the engine fails to start then repeat the above sequence to check
that the procedure has been followed. If unsuccessful then contact
the Rage Motorsport customer support.
To stop the engine simply press the Start / Stop button.
If your vehicle is not road legal is supplied without the remote key fob then,
omit the process involving this unit.
To Next Page
Loading...