Raider RD-RLM44 - Page 15

15
ORIGINAL INSTRUCTION MANUAL
Dear Customer,
Congratulations on the purchase of machinery from the fastest growing brand of electric,
gasoline and pneumatic machines - RAIDER. When properly installed and operating, RAIDER are
safe and reliable machines and work with them will deliver a real pleasure. For your convenience
has been built and excellent service network of 45 service station across the country.
Before using this machine, please carefully acquainted with these “instructions for use.
In the interest of your safety and to ensure proper use and read these instructions carefully,
including the recommendations and warnings in them. To avoid unnecessary errors and accidents,
it is important that these instructions will remain available for future reference to all who will use
the machine. If you sell it to a new owner “Instructions for Use” must be submitted along with it to
enable new users to become familiar with relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner
of the trademark RAIDER.
Adress: Soa City 1231, Bulgaria “Lomsko shausse” Blvd. 246, tel 02 934 33 33, 934 10 10, www.
raider.bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with
scope of certication: Trade, import, export and servicing of hobby and professional electrical,
mechanical and pneumatic tools and general hardware. The certicate was issued by Moody
International Certication Ltd., England.
TECHNICAL DATA
Parameter Unit Value
Model
-
RD-RLM44
Voltage V DC 20
Battery capacity Ah 2
Drive speed km/h 1.2
No load rotations per minute (no-load) min
-1
3100
Cutting height mm 25-60
Cutting witdth mm 180
Sound pressurе (LpA) dB 41.1
Sound guaranteed Level (LwA) dB 66
Protection type - IPX4
EN