16 www.raider.bg
Safety instruction
important! Read the in struction manual carefully. Keep the instruction manual for subsequent
consultation.
This device may cause seri ous injury if used improperly. To avoid personal injury and damage to
property, read and comply with the follow ing safety instructions and familiarise yourself with all
control elements
Preparation:
This device is not intended for use by children, individuals with limited physical, sensory or mental
capabilities, those with insucient experience or knowl edge or individuals who are not familiar with
the instructions.
Children should be supervised to ensure that they do not play with the device. Cleaning and
maintenance must not be car ried out by children. • Never let children or persons who are not familiar
with these instructions use the machine. Lo cal regulations may restrict the age of the operator.
• The operator or user is respon sible for any accidents or per sonal injury and/or material damage to
third parties or their property.
• Check the terrain on which the device will be used and remove any stones, sticks, wires or other
foreign objects.
• Always perform a visual inspec tion of the device before using it. Do not use the device if its safety
equipment, parts of the cutting unit or bolts are missing, worn or damaged. Damaged tools and bolts
must only be replaced as a set to prevent im balance.
• Take care when using devices with several cutting tools since the movement of one blade can lead
to rotation of the other blades.
• Only use spare parts and acces sories which are supplied and recommended by the manufac turer.
Using externally produced parts results in the immediate loss of the warranty claim. Ensure correct
installation of the automatic perimeter guard system according to the instruc tions. Using the device:
Do not bring your feet or ill hands into the vicinity of rotating parts (or beneath them) when working.
Risk of injury! Observe noise protection rules. • Never leave the machine unat tended if you know
that pets, children or other people are nearby.
• Use the machine only in daylight or with good articial lighting.
• Avoid operating the machine when the grass is wet.
• Do not operate the machine if you are not wearing closed foot wear. Always wear sturdy shoes and
long trousers.
• Always make sure you have a rm footing on slopes.
• Be especially careful when turn ing the machine towards you.
• If foreign bodies enter the cut ting tools, or if the machine generates unusual noises or vibrates
unusually, immediately turn o the power supply (STOP) and allow the machine to come to a
standstill. Disconnect the machine from the mains supply and perform the following steps before
switching the machine on again and operating it: - Check the machine for dam age;
-replace or repair all damaged parts;
-check whether there are any loose parts and tighten as nec essary. • Switch o the device, wait
for the blades to come to a stop and remove the battery from the device.
-before a blockage is removed;
-before checking, cleaning or working on the machine;
-to check the machine for dam age after a foreign object has entered;
-for an immediate check if the machine starts to vibrate ab normally.
•Switch the motor on as directed and only if your feet are a safe distance away from the cutting
tools.
• Switch the device on with care in accordance with these instruc tions. Ensure your feet are at a
sucient distance from the rotat ing blades.
The device must not be lifted or transported while the motor is running. Switch the device o if
it needs to be tilted for trans port, if surfaces other than lawn need to be traversed, and while the
device is being brought to and from the mowing terrain. • Do not work with a damaged or
incomplete device or one which has been converted without the permission of the manufacturer.
To Next Page
Loading...
