Rain Master Irrigation Systems DX2 User Manual
Appendix A: Flow Meters Page 241
Limit Checking with Two Flow Meters
When two flow meters are used, you may select which meter is
used for limit checking. Alternately, you may check the total
flow from both meters.
See Chapter 4: Setup for details.
Flow Meter Reading
Procedure
To observe flow meter readings, from the base menu:
Step 1 Advance to the Measurements Options screen as
follows:
Figure 175: Measurement Options
Step 2 Select F1=FLOW METER.
The meter flow readings for Flow #1 and Flow #2
are shown in Gallons-Per-Minute. Readings are
updated every 10 seconds.
F1=Main Menu
F3=Status
F2=Measurements
|F1|=FLOW |F2|=CURRENT
To Next Page
Loading...