N-Series 3D Printer
/ Quick Start Guide
B Hardware Installation (continued)
List of Contents
Spatula
Filament
(×1/×2)*
Filament Holder
(×1/×2)*
Nozzle
Cleaning Kit
Glass with
Protective Foam
Hex Wrenches
2.5mm 2mm 1.5mm3mm
Fan Cover
(×0/×2)*
Tweezers
USB Storage Other Accessories
(Spare)
Filament Guide
Tube (×2/×4)*
Fuse
15A
10A
Build Plate Clips
Filament Guide
Tube Holder
Power Cable
* Due to the difference between single and dual extrusion machines, the quantity of some of the products
received will be different.
Besides, there is only one fan cover in the printer with single extruder and it is has already been equipped
to the printer.
To Next Page
Loading...
