Raise3D N2 Plus - User Manual

N2 N2 Plus
Quick Start Guide
N-Series 3D Printer
* Please review this entire guide before operating the printer.
N2 N2 Plus

Summary

Hardware Installation (continued)

Final Setup and Power-On

Hardware Installation (continued)

Filament Loading Procedure

Guide on setting temperature, feeding filament through the tube, and engaging the gear.

ideaMaker Initial Settings

Printer Model Selection

Filament and Extruder Configuration

Using ideaMaker

Import and Slice Model

Import a 3D model file and initiate the slicing process.

Configure Slicing Templates

Select slicing templates, edit platform addition, and support settings.

Using ideaMaker (continued)

Save Sliced Files to USB

Save the generated .gcode and .data files to USB storage.

Start First Print

Printer Leveling and Calibration

Home axes, check leveling, and adjust nozzle-to-platform distance.

Start First Print (continued)

Loading and Starting a Test Print

Raise3D N2 Plus Specifications

General

Filament Diameter	1.75 mm
Print Speed	up to 150 mm/s
Nozzle Temperature	up to 300°C
Frame	Aluminum
Nozzle Diameter	0.4 mm
Connectivity	USB, Ethernet, Wi-Fi
Supported Materials	PLA, ABS, PETG, TPU, Nylon
Build Plate	Heated
Display	Touchscreen
Power Supply	500W
Build Volume	305 x 305 x 610 mm